REMOVING wooden elements

Wood is a natural product and therefore unique in grain, shape and texture.

Of course, with a natural product there are always small defects that need to be repaired to create the perfect workpiece and ensure the required stability - Because this is inevitable we come into play.
Whether it is a fallen out or black branch or a troublesome resin spot, we have the solution ready.
We offer patching strips, knot dowels, cross wood discs and other products for patching.
Mainly these products are used by carpenters, joiners and glulam factories.
All products from this category are 100% manufactured in Austria.

Branch dowels are perfect for mending knots that have fallen out or are black. A replacement branch leaves the natural texture intact.
All commercial formats and wood species are in stock and can be delivered within a very short time.

TYPES OF WOOD: spruce, larch, pine, oak, beech, ash etc.
STANDARD PACKING : 250 pcs/carton or loose in bulk
AVAILABLE DIAMETERS IN MM: 10 | 15 | 20 | 25 | 30 | 35 | 40

The standard height for branch dowels is 9mm. Special formats (e.g. special height 7mm) and special packaging are possible on request

We offer a wide range of sizes and types of wood in the case of cone plates, also known as cross-cut plates. All plates have a one-sided cone and are cut rough. The standard height is 10mm.

WOOD TYPES: spruce, pine, larch, oak, beech and ash.
Special wood species such as mahogany (Sipo or Sapelli) or Douglas fir are also available at short notice.

AVAILABLE DIAMETERS: in 5 mm increments from 10 - 50mm.
STANDARD PACKAGING: in cartons of approx. 1kg and bags of approx. 10kg.

Special sizes and packaging are always available upon request.

With resin patches, we offer a huge selection of formats and wood types, so that almost any spot can be repaired.

With standard milling cutters, you can easily remove resin spots and patch them up again. All commercially available formats such as sizes G2 and G4 are in stock and can be delivered within a very short time.
Other available formats are: G1 | M8 | M15 | M20 | M24 

With over 25 species of wood, the diverity here is very wide. In our warehouse you will find all standard sizes in the wood species spruce, pine, oak, ash, maple, as well as domestic and Siberian larch.

Within about 2 weeks we can also deliver all format in other wood species.

Patch strips are perfectly finished and are made of domestic wood species.
All longitudinal edges are chamfered or rounded and the end faces are rounded with radius of 52mm or 62mm

Available wood kinds: spruce, larch

Format (width x height): 8.5 | 20.2 | 41.3 | 41.7 mm x 10 mm
Standard lengths: 150 | 250 | 500 | 1000mm

Special wood species and special lengths: on request.
Packing: loose in cartons